| Customization: | Available |
|---|---|
| After-sales Service: | Engineer |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Host composition:
1. The main engine must be made of large cast iron and steel structure. (pig iron undergoes secondary processing).
2. The main drive shaft must be seamless steel pipe (tempered. Surface hardened, chrome-plated, surface, dynamic balance treatment).
3. The main driving pressure roller is made of rubber (butadiene rubber).
4. The guide roller material adopts aluminum roller (hard chrome plating and special polishing treatment to avoid material scratches) and rubber roller (butadiene rubber).
5. The driving mode of the main machine and the rewinding shaft must be equipped with high-quality synchronous wheels and belts.
6. All bearings must be lubricated and protected by dust covers.
7. White machine. Please note that there is no paint on the slide guides, cylinder shafts and any precision instruments.
8. All machine parts must be painted white (not nickel/chrome)
9. All machine parts must have good finishing
10. All main bearings must have a lubrication maintenance point.
11. All welds must be cleaned before painting.
12. Wires of the same color must have the same function (for easy maintenance)
13. The wire connection must be as accurate as possible.
14. The brake resistor must be fixed on the top of the electrical box.
15. The gear hole should be adapted to the shaft for installation
16. All sensor brackets must be made of solid steel rod.
Unwinding composition:
1. Unwinding into an independent structure. It uses movable brackets with maximum linear guides to reduce friction when the EPC is operating.
2 Shaftless air expansion shaft unwinding, which can quickly clamp and load raw materials (single-person operation).
3. A set of balance adjustment device, which can be adjusted left and right, forward and backward through the manual turntable.
4. On both sides of the unwinding, there are two sets of guide rollers, which prevent sliding to the left or right when the material is close.
5. The tension brake for unwinding has two sets of magnetic powder, or air brakes. Two gauges to check the tension of unwinding material.
6. EPC uses the German brand "E+L" edge and line tracking device. It can accurately complete the tracking function from the edge of the material.
7. The film cutting and receiving station must be as close as possible to the coil material (not between the unwinding machine and the main machine).
8. The second display is near the current roll, showing the parameters at the end of the roll.
9. The unwinding accessories must be protected by a barbed wire and unimportant elements. (SICK or PILS brand).
Rewinding part:
1. The winding shaft adopts 2.755 inches (70mm), 3 inches (76mm), 6 inches (152mm) slip shafts, controlled by proportional valves.
2. The locking mode adopts pneumatic control.
3. The brakes of winding tension are two sets of proportional valves, which realize constant tension by calculating the current pulled-in material through PLC.
4. Winding rollers (two sets).
5. Two slitting systems, one circular cutter (20 sets) system can be adjusted quickly, and one straight knife system with a slitting machine bracket (20) equipped with a ruler. When an emergency stop occurs, the knife or blade must be forcibly withdrawn from the film.
6 Equipped with a vacuum waste removal system, using a powerful waste removal system
7. Equipped with a movable waste edge rewinder, which is used for rewinding thick materials in the machine. It is controlled by the host, and automatically follows the current speed of the machine, while reducing dust in the purification workshop.
8. Real-time diameter inspection technology is connected to the rewinding part, the German brand "P + F" ultrasonic sensor detects the precise diameter and it calculates the most suitable tension for the PLC, when the rewinding diameter is changing, two strain gauges are used to check the current pull-in material (closed loop control).
9. Equipped with a discharge rack can provide a larger diameter finished product. Simple, efficient operation and time saving for the next feed.
10. The discharge frame must have two 2.755 inch shafts and two 6 inch diameter removable adapters or
axis.
11. The unloading rack must have an unlocking function on the control panel. (not on the unloading shelf).
12. It must be able to rewind the 3-inch upper reel and the 6-inch lower reel at the same time.
(one ultrasonic sensor per axis must be used).
13. It must be possible to have shafts of different lengths between the upper and lower winding shafts.
14. The rewinder must be equipped with 12 paper tube positioning lasers.
15. The laser locator can be turned off/on individually on the touch screen or control panel.
16. Before winding the reel, a crowbar system must be installed to keep the film in position when the paper tube is changed.
17. The motor automatically pushes the material. (Please note our rollers are heavy with 6 inch paper tubes).
18; Equipped with a safety device and a safety relay (Sick or Leuze brand).
Composition of electrical equipment:
1. A main servo motor.
2. Two winding servo motors.
3. ECP adopts analog control, through ultrasonic or optical signal, driven by servo motor.
4. Two tension gauges are used to control the automatic tension of the unwinding part.
5. Two ultrasonic sensors adopt upper and lower winding shafts to check the actual diameter change of each shaft, for better tension control.
6. A Siemens PLC can realize accurate and stable control, color touch display screen can make the picture simple and beautiful. The interactive parameter setting environment can start working without complicated structures: the user only needs to input the thickness, width, density, diameter and speed parameters of the material, and then the calculation must be automatically completed by the computer.
7. Automatic and manual function operation acceleration and deceleration.
8. Static elimination function: The machine must be equipped with two sets of ion generators on the upper and lower rewinding shafts, which can effectively eliminate the static electricity generated during slitting and rewinding.
9. The movable main control box can follow the operator from the front to the back of the machine (easy to use).
10. The second touch screen (Siemens) must be installed at the back of the machine (bottom of the coil).
11. A switch box must be installed on the side of the operator to switch each laser (20).
Machine performance:
1.4-500m/min.
2. The maximum roll paper diameter is 1200mm, and the weight is 2 tons.
3. Film width 1600mm.
4. Film thickness 14-200µm.
5. The maximum diameter of the winding shaft is 800mm.
6. The minimum winding width is 40mm.
7. The diameter of the winding shaft is 2.755 inch (70mm), 3 inch (76mm) and 6 inch (152mm).
8. It can rewind materials with different widths up and down at the same time.
9. It can run 3inch upper winding shaft and 6inch lower winding shaft at the same time.
10. Two cutting systems with 20 round knives and straight knives.
11.20 The paper tube positioning laser has each independent switch.
Emergency stop:
Principle: When someone presses the emergency stop, everything running (motors, pneumatics, hydraulic bearings...), and moving parts must be stopped as quickly as possible (interrupt, stop ..) to prevent personal injury.
This means that all hazardous areas must be protected (including emergency switches, non-essential resistors and safety relays, non-essential steel bars have a safety relay close to the material unwinding section...). the
The PLC never does any emergency stop action!!!! It only receives emergency messages to reset its logic, and the output is in an initialized position. the
After pressing the emergency button, the operator must press another button to restart the machine (reset).
Wenzhou Mwellpack Machinery Co., Ltd. accepted the audit of SGS factory inspectors and recently obtained the SGS factory qualification verification certificate and factory main product certification certificate. SGS, the full name of Swiss General Notary Company, was founded in 1878. It is currently the largest and oldest private third-party multinational company in the world engaged in product quality control and technical appraisal. SGS is recognized as the global benchmark for high standards of professionalism, quality and integrity and is unanimously recognized by buyers around the world.
The company has passed the SGS factory inspection and will help foreign customers understand whether the factory's wages, working hours, occupational health, safety environment and productivity are in compliance with local regulations and customers' own standards, including human rights and social responsibility factory inspections, production and quality factory inspections, Environmental audits and other aspects provide authoritative third-party testing reports, thereby increasing buyers' trust in the company and improving competitiveness. (Marketing Department)
1.1 After receiving the delivery notification email from the PM, the production supervisor confirms that the relevant information is correct and issues the delivery notification;
1.2 After receiving the delivery notice from the production supervisor and confirming the packaging requirements, the production person in charge will conduct factory quality inspection of the equipment simultaneously:
1.3 After the equipment passes the quality inspection, the production personnel will classify, pack and pack the equipment, and issue a material details list corresponding to the parts/loose materials (the material details must include the number of packaged pieces and details of each material), and use eye-catching colors for valuable items. Package:
1.4 Quality inspection of dismantled materials: 1. Whether the packaging and marking of materials are reasonable: 2. Whether the materials are damaged: 3. Check the material details to confirm whether there are any missing materials: After passing the quality inspection, take photos for documentation:
1.5 Production, quality and equipment debugging FAE parties must sign and confirm on the material details list (no FAE personnel and equipment can be ignored): At the same time, the PM who owns the equipment must email the relevant personnel to ship the equipment information (the information includes but is not limited to equipment material details, delivery orders , photos and equipment arrival time, etc.):
1.6 Production management arranges logistics and delivery: the equipment belongs to the PM and arranges the receiving personnel in advance.
2.1 The equipment arrives at the buyer's factory, and the buyer's receiving personnel receive the equipment;
2.2 Count and check the number of packing boxes, check whether the packing boxes are damaged, have water ingress, etc.: Any abnormality must be recorded, take pictures and send feedback to relevant personnel of our company (production management, quality, PM, mechanical and electrical, etc.) via email: no abnormality/abnormality After the processing is completed, unpacking is performed;
2.3 The buyer's receiving personnel conduct unpacking inspection, check the actual material quantity against the material detailed list, detect whether the materials are damaged, etc., and output the corresponding unpacking inspection form: any abnormalities must be recorded, and at the same time, take pictures and send feedback to the relevant personnel via email Personnel (production management, quality, PM, electromechanical, etc.): If there are no exceptions/after the exception handling is completed, the equipment will be assembled and debugged. At the same time, the material list (with the counted quantity attached)-signature confirmation version and other emails will be sent to the relevant personnel (production management) , quality, PM, electromechanical, etc.) file
Note: After an abnormality occurs during the receipt of goods, the abnormal feedback must be timely and effective - the day of receipt and delivery/the day of unpacking
Wenzhou Mwellpack Machinery Co., Ltd was founded in 2014. The existing factory area is 4000 square meters. It has a professional team specializing in production of packing machine, slitting machine ,paper tube machine etc ,product for nine years. It's a scientific and technological enterprise integrating scientific research, design, manufacturing, sales and service.
The leading products are packing machine, slitting rewinding machine , sticker die cutting machine , paper tube machine and product etc . During the past a few years, our company has accumulated rich production experience from practice and continuously promoted the scientific and technological innovation of products. It has developed from a single packing machine supplier into a mainstream supplier of full packing machine production lines. Our company has formed complete sales network and complete after-sales service system in China. The products sell well in many provinces, cities and regions in China and are exported to Europe, America, the Middle East, Southeast Asia and other countries.
Our company is committed to the quality policy of "survival by quality, development by innovation and satisfying customers by service" and resolutely implements the IS09001 international quality management system standard. With the tenet of "customer satisfaction", we abide by the promise, seek long-term cooperation with the majority of colleagues and make efforts to promote common development.
Wenzhou Mwellpack Machinery Co., Ltd. is the source factory and has the advantages of the source factory.
First, our company has a cost advantage. Our factory starts production directly from raw materials, avoiding the processing and transportation costs of intermediate links, so it can reduce production costs and improve competitiveness.
Second point, our company can control quality. Our factory conducts strict quality control on raw materials to ensure stable and reliable quality of the products produced.
The third point is high flexibility. Our factory adjusts plans in a timely manner according to market demand, produces products that meet market demand, and improves market response speed.
The fourth point is environmental protection advantages. Our factory implements effective resource utilization and waste treatment of raw materials to reduce environmental pollution
The fifth point is technical advantages. Our factory masters advanced production technology and processes to improve production efficiency and product quality.
Mwellpack Machinery after-sales service includes
1 Training service: Provide customers with equipment operation training to ensure that customers can use the machine correctly and safely.
2. Maintenance support: Provide regular equipment maintenance services to ensure the normal operation of the equipment and reduce the possibility of failure.
3. Spare parts supply: Provide original spare parts and timely spare parts supply services to ensure that customers can quickly repair equipment problems.
4. Remote technical support: Provide timely technical support to customers through remote channels such as telephone networks to solve problems in the use of equipment.
5. On-site service: Quickly respond to customers' on-site service requests and provide professional technicians for troubleshooting and repair.
6. Upgrade services: Provide corresponding services to customers when equipment is upgraded or updated to ensure that they always use the latest technologies and functions.
Q1: How to find a machine suitable for my product?
Tell us about your product details and requirements.
1. What kind of product you would like to produce ?
2. Requirement details
3. You requirement for the machines . Q2: Is engineer available to serve oversea?
Q2:Do you also offer the material product and spare parts ?
Yes, we can offer you the material product and spare parts .
Q3:How long of the warranty period?
Whole machine 2 year. In warranty period, We will send the part free to replace the one that is broken
Q4: Is engineer available to serve oversea?
Yes, but the travel fee is responsible by you.
In order to save your cost, we will send you a video of full details machine installation and assist you till the end.
Q5. How can we make sure about the machine quality after place the order?
Before delivery, we will send you the pictures and videos for you to check the machine quality.
And also you can arrange for quality checking by yourself or by your contacts in China.
Q6. We are afraid you won't send us the machine after we send you the money?
We have our business license and certificate. And it is available for us to use trade assurance service,guarantee your money, and guarantee your machine's on-time delivery and machine quality.
Q7. Can you explain me the whole transaction process?
1.Sign the Contact
2.Arrange 30% deposit to our factory
3.Factory arrange production
4.Testing & detecting the machine before shipping
5.Inspected by customer or third agency through online or site test.
6.Arrange the balance payment before shipment.
Q8 Where is your address ?
Our factory stay Building C-27 , Shangwang Street Ruian City , Wenzhou City, Zhejiang Province China. Our nearest air port is Wenzhou Longwan International Air Port . The nearest train station is Ruian station . If you can not order to ruian. The Second trains Station is Wenzhou Nan station.Wenzhou City is 600KM from Shanghai City .It is one hour by air and 4 hour by fast train .
Wenzhou City is 1250KM from CANTON City .It is TWO hour by air and 10 hour by fast train .
){kind=link}